Is Shimano about to ditch derailleur hangers? Patent reveals direct

Shimano looks to be following SRAM with a direct-mount derailleur design

This competition is now closed

By Nick Clark

Published: March 27, 2023 at 5:12 pm

A patent application filed by Shimano appears to show that the brand is working on an integrated rear derailleur, similar to what we’ve seen on SRAM's new T-Type Eagle Transmission.

The patent drawing shows a clamp design with the derailleur fitting directly onto the rear dropout, removing the need for a derailleur hanger, and held in place by the thru-axle.

The patent application hints at Shimano moving to a design similar to SRAM's direct-mount T-Type rear derailleur.

However, as with any patent application, concrete details are limited. It does, however, provide another hint as to where the future of high-end drivetrains may lie.

Here's what we know so far.

Before, we look at Shimano's patent, let's quickly cast an eye back at SRAM's new T-Type Eagle Transmission, launched only last week.

In one of the most significant developments in drivetrain design in a number of years, T-Type Eagle combines SRAM's existing Universal Derailleur Hanger standard with a new, direct-mount rear derailleur.

The new derailleur has no B-tension or limit screw adjustment, and doesn't need a derailleur hanger. Instead, it mounts directly to the bike's frame at the dropout.

The derailleur has user-replaceable components and, all told, SRAM says the new T-Type Transmission is intended to increase drivetrain robustness and reliability, improve shifting under load and offer easier setup. (How does it perform? Read our SRAM T-Type Eagle review).

So what about Shimano?

Shimano's patent drawing shows a design for the mounting of a derailleur "coaxially" to the rear wheel of a bike.

Shimano says the purpose of the patent is "to provide a rear derailleur with improved usability".

Key to this is what Shimano describes as an "‘angular position structure". This looks similar to a B-gap screw on the rear of the mount and will likely be used for the initial setup of the rear derailleur.

This could also suggest that Shimano's design is intended to work with different cassette sizes. By comparison, SRAM's T-Type derailleur forgoes the B-gap screw as it is designed to specifically work with a 10-52t cassette.

Shimano says the B-gap screw improves usability because it "allows for easy adjustment of the angular position of the rear derailleur relative to the frame of the bicycle".

The patent application shows the setup tool needed. This measures the number of teeth on the cassette to help line up the derailleur correctly.

The patent document also specifies the thickness of the two arms that fit around the dropout. It says these arms will have a radial thickness of at least 2mm to increase the rigidity of the rear derailleur.

Shimano's patent depicts a similar-looking design to SRAM's T-Type rear derailleur.

Notably, Shimano's drawing shows two arms sandwiching the rear dropout.

As with the T-Type mount, Shimano's patent drawing shows the rear axle screwing into a thread used to mount the derailleur, centring the derailleur around a constant point of reference.

Ahead of launching the T-Type Eagle Transmission, SRAM introduced the Universal Derailleur Hanger dropout standard in 2019.

A bike must use UDH in order to be compatible with SRAM T-Type's Hangerless Interface and, in turn, accept the T-Type rear derailleur.

Shimano's drawings hint at a similar design, though at this stage we’re unable to comment on how it might influence frame design and, significantly, any cross-compatibility with SRAM's UDH standard.

This patent application suggests Shimano may add a true direct-mount option to its mountain bike range.

On the one hand, Shimano appears to be following SRAM, but this would not be Shimano's first foray into direct-mount derailleurs – at least in name.

Shimano's Direct-Mount Rear Derailleur (DRD) standard, which debuted in 2012, replaced the upper link of traditional hangers, connecting the frame to the upper pivot of compatible derailleurs.

However, this still sees the derailleur mounted below the dropout.

Shimano's latest patent shows the first design from the Japanese firm whereby the derailleur is mounted directly to the axle/dropout.

Will we see Shimano's patent come to life?

Well, we’ll have to wait and see on that one. A patent application doesn't guarantee an end product and, while Shimano's application was published in June 2022, we have no way of knowing whether anything has progressed since then.

But, given SRAM's recent move with the public launch of T-Type, a direct-mount counter-punch from Shimano seems more likely than not.

Digital Writer

Nick Clark is a digital writer for BikeRadar, focusing on all things mountain bikes. Having raced XC for most of his youth, he has a deep understanding of the sport and loves bounding around the UK to spectate at events. A mountain biker at heart, Nick helped create a community of trail builders in his local forest in North Wales. Nick also loves road cycling, where he has completed the holy trinity of spectating at all three grand tours in their host countries. Described as having a good engine in his racing days, it's now common to see Nick wheel-sucking on club rides and sprinting for town signs. He also enjoys bike touring and has completed numerous travels on the west coast of Europe, most recently riding from Lisbon to Roscoff. Nick has built many of his bikes from the frame up and has a keen eye for technical detail. He is currently riding a YT Capra on the trails and a Focus Izalco Max for the road.

Order the Official Tour De France Race Guide 2023

Only £10.99 including FREE UK delivery

Subscribe to MBUK and get a pair of Crankbrothers Stamp 1 pedals as your welcome reward! Plus, save 25% off the subscription price!